|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Center Point Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Center Point Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Center Point Cemetery. We've listed the following communities based on their distance, with the closest first.
- Phil Campbell
(2 miles [3.2 km] to the northwest)
- Bear Creek
(3 miles [4.8 km] to the south)
- Spruce Pine
(5 miles [8 km] to the northwest)
- Churntown
(5 miles [8 km] to the north)
- Haleyville
(7 miles [11.3 km] to the southeast)
- Littleville
(7 miles [11.3 km] to the southeast)
- Hackleburg
(8 miles [12.9 km] to the west)
- Pebble
(8 miles [12.9 km] to the east)
- Prebble ‑ Historic
(8 miles [12.9 km] to the east)
- Boar Tush
(9 miles [14.5 km] to the southeast)
- Rockwood
(10 miles [16.1 km] to the northwest)
- Thornhill
(11 miles [17.7 km] to the south)
- Delmar
(11 miles [17.7 km] to the southeast)
- Russellville
(13 miles [20.9 km] to the north)
- Ashridge
(13 miles [20.9 km] to the southeast)
- Hodges
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Hodges have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hodges
- Hodges is located in Franklin County
- Population from the 2020 Census: 284 people
- Jump to TripAdvisor's Tourism page for Hodges <2>
- Glen Mary
(14 miles [22.5 km] to the south)
- Belgreen
(14 miles [22.5 km] to the northwest)
- Camp Spring ‑ Historic
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Camp Spring have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camp Spring
- Camp Spring is located in Lawrence County
- Mount Hope
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Mount Hope have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Hope
- Mount Hope is located in Lawrence County
- Natural Bridge
(16 miles [25.7 km] to the south)
- Slickrock Ford ‑ Historic
(18 miles [29 km] to the northwest)
- Concord
(19 miles [30.6 km] to the northeast)
- Mehama ‑ Historic
(19 miles [30.6 km] to the northeast)
- Littleville
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Littleville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Littleville
- Littleville is located in Colbert County
- Population from the 2020 Census: 992 people
Off-the-Road Links ...
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Center Point Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.3196, Longitude: -87.6886 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|