Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Wilhite Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Wilhite Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Wilhite Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Milan
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Milan
- Milan is located in Sullivan County
- Population from the 2020 Census: 1,764 people
- Jump to TripAdvisor's Tourism page for Milan <2>
- Osgood
(6 miles [9.7 km] to the west) - Humphreys
(7 miles [11.3 km] to the southwest)- Jump to our Gazetteer entry for Humphreys
- Humphreys is located in Sullivan County
- Population from the 2020 Census: 107 people
- Boynton
(9 miles [14.5 km] to the northeast) - Galt
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Galt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galt
- Galt is located in Grundy County
- Population from the 2020 Census: 241 people
- Jump to TripAdvisor's Tourism page for Galt <2>
- Harris
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Harris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harris
- Harris is located in Sullivan County
- Population from the 2020 Census: 55 people
- Jump to TripAdvisor's Tourism page for Harris <2>
- Browning
(11 miles [17.7 km] to the south) - Newtown
(13 miles [20.9 km] to the northwest)- Note: The GPS coordinates that we are using for Newtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newtown
- Newtown is located in Sullivan County
- Population from the 2020 Census: 163 people
- Jump to TripAdvisor's Tourism page for Newtown <2>
- Pollock
(13 miles [20.9 km] to the northeast) - Green City
(14 miles [22.5 km] to the east)- Note: The GPS coordinates that we are using for Green City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green City
- Green City is located in Sullivan County
- Population from the 2020 Census: 582 people
- Dunlap
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Dunlap
- Dunlap is located in Grundy County
- Laredo
(16 miles [25.7 km] to the southwest) - Purdin
(17 miles [27.4 km] to the south) - Lucerne
(18 miles [29 km] to the north) - Greencastle
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Greencastle
- Greencastle is located in Sullivan County
- Population from the 2020 Census: 243 people
- Jump to TripAdvisor's Tourism page for Greencastle <2>
- Pennville
(18 miles [29 km] to the northeast) - Winigan
(19 miles [30.6 km] to the southeast) - Spickard
(19 miles [30.6 km] to the west)- Note: The GPS coordinates that we are using for Spickard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spickard
- Spickard is located in Grundy County
- Population from the 2020 Census: 236 people
- Jump to TripAdvisor's Tourism page for Spickard <2>
- Tindall
(20 miles [32.2 km] to the west) - Trenton
(21 miles [33.8 km] to the west)- Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trenton
- Trenton is located in Grundy County
- Population from the 2020 Census: 5,620 people
- Jump to TripAdvisor's Tourism page for Trenton <2>
- Linneus
(22 miles [35.4 km] to the south) - Unionville
(22 miles [35.4 km] to the northeast)- Note: The GPS coordinates that we are using for Unionville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Unionville
- Unionville is located in Putnam County
- Population from the 2020 Census: 1,733 people
- Jump to TripAdvisor's Tourism page for Unionville <2>
- Ravanna
(22 miles [35.4 km] to the northwest)- Jump to our Gazetteer entry for Ravanna
- Ravanna is located in Mercer County
- Farmersville
(23 miles [37 km] to the southwest)- Jump to our Gazetteer entry for Farmersville
- Farmersville is located in Livingston County
- Chula
(23 miles [37 km] to the southwest)- Note: The GPS coordinates that we are using for Chula have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chula
- Chula is located in Livingston County
- Population from the 2020 Census: 204 people
- Jump to TripAdvisor's Tourism page for Chula <2>
- Princeton
(23 miles [37 km] to the northwest)- Jump to our Gazetteer entry for Princeton
- Princeton is located in Mercer County
- Population from the 2020 Census: 1,078 people
- Jump to TripAdvisor's Tourism page for Princeton <2>
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Wilhite Cemetery. The point we use is located at these GPS coordinates - Latitude: 40.1961, Longitude: -93.2185 In this case, the coordinates for the Wilhite Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |