West Point, Alabama
Census Data for West Point ...
The most recent Census Estimate<1> was for 2015 and it gives West Point a population of 593 people.
The last Decennial Census<2> was in 2010, giving West Point a population of 586 people.
The town of West Point is located in Cullman County. The 2010 Census gave Cullman County a population of 80,406 people. This means that West Point had 0.73% of the county's total population, making it Cullman's 8th most populous community.
At the same time, Alabama had a population of 4,779,736 people, meaning that West Point had 0.01% of the total population of Alabama - making it the state's 316th most populous community.
When the Census Bureau conducts a census for a town like West Point, they draw a boundary around the area in which they are going to conduct their count - this is called a sampling area (or a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.
Things like the population, area and housing for West Point reflect the sampling area. Since the shape of the sampling area and the actual boundaries of&$160;West Point might be slightly different, it's best to check with the U.S. Census Bureau if you need precision.
The 2010 Census shows that the sample polygon for West Point has a total area of 3.44 square miles [8.9 km²]. Of this total, a small amount of the area is covered by water (0.03 square miles [0.1 km²]).
Cullman County has a land area of 734 square miles [1,903.2 km²]. At 3.42 square miles [8.8 km²], West Point has 0.46% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually at the center of the polygon). At the time of the 2010 Census, the sampling area was located at:
Lat: 34° 14' 28" (or 34.24°)
Lon: -86° 56' 35" (or -86.94°)
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (586 people) and land area (3.42 square miles [8.8 km²]) values from the 2010 Census, West Point had a population density of 170.2 people per square mile [65.7 people/km²].
In comparison, the 2000 Census shows West Point had a population of 295 people and a land area of 1.16 square miles [3 km²]. This gives a population density of 254.8 people per square mile [98.4 people/km²]
NOTE: Be aware that when comparing population density between the 2000 and the 2010 Census, there were changes in the sampling area for West Point. You need to be careful when making such a comparison, the differences are likely to lead to a misleading comparison. More information about the nature of these differences can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, West Point had 258 Housing Units<3> and with its population of 586 people, this averages 2.27 people per Housing Unit.
The 2010 Census shows West Point had a land area of 3.42 square miles [8.8 km²]. This translates to 75 Housing Units per square mile [28.94 housing units/km²].
From the Census of 2000: West Point had 140 Housing Units, a population of 295 people and a land area of 1.16 square miles [3 km²]. This gives a density of 2.11 people per Housing Unit and 120.9 Housing Units per square mile [46.68 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 Census and the 2010 Census, there were changes in the sampling area for West Point and you need to be careful when comparing results between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).
Cullman County ...
The community of West Point is located in Cullman County.
The county had a population of 80,406 people at the 2010 Census. With it's population of 586 people, West Point represented 0.73% of the county's total.
In addition, where the town of West Point has a population density of 170.2 people per square mile [65.7 people/km²], Cullman County averages 109.4 people per square mile [42.25 people/km²].
For more information, please visit our Census Page for Cullman County.
Population Rings for West Point ...
To help identify the number of people who live in West Point and the surrounding area, we have drawn concentric rings centered on West Point. We counted the number of communities within each ring and summed their populations.<4>
|5 mi [8 km]||2||1,350||+1.12%|
|10 mi [16 km]||5||20,249||+3.03%|
|15 mi [24 km]||10||37,053||+2.29%|
|20 mi [32 km]||18||46,787||+3.71%|
|25 mi [40 km]||21||107,258||+1.23%|
|30 mi [48 km]||33||127,686||+2.01%|
US Census QuickFacts ...
The Census Bureau has created documents containing demographic information called QuickFacts. Although they haven't created a QuickFact for West Point, there are QuickFacts available for the following nearby communities:
For more about neighboring communities, please visit our Nearby Page for West Point. For an expanded list of the communities that are closest to West Point, see our County-by-County Page for West Point.
A Census QuickFact is available for Cullman County (QF-01043).
Below are QuickFacts for the counties that border Cullman County.
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for West Point, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of West Point. It's important to note that from one Census to the next, the shape and location of the polygon can change.
If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 197.25% larger than the 2000 Census.
The 2010 Census shows that the total area for West Point was 3.44 square miles [8.9 km²]. Of this total, 3.42 square miles [8.8 km²] is land, with the balance (0.78%) being water (0.03 square miles [0.1 km²]).
The 2000 Census shows a total area of 1.16 square miles [3 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of West Point, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for West Point.
For the 2010 Census, the location was given as:
Lat: 34.238751° (or 34°14'19" N)
Lon: -86.964033° (or -86°57'50" W)
For the 2000 Census, the location given was:
Lat: 34.241338° (or 34°14'28" N)
Lon: -86.943126° (or -86°56'35" W)
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 6,371 feet to the west<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2406865) to West Point. This identifier also marks a GSP point on the map, and that point lies within the boundaries of West Point. The GNIS point has been mapped to the latitude/longitude:
Lat: 34.238158° (or 34°14'17" N)
Lon: -86.958596° (or -86°57'30" W)
The GSP location given for the 2010 Census lies 1,652 feet to the west<6> of the point given by the GNIS for West Point. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for West Point.
Miscellaneous Information for West Point ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has referenced one (or more) of the following identifiers when referring to either Cullman County or the town of West Point:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to West Point:
GNIS ID for West Point: 2406865
GNIS ID for Cullman County: 161547
GNIS ID for Alabama: 1779775
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 01 (Alabama)
County Code: 043 (Cullman County)
Place Code: 81528 (West Point)
State & County Code: 01/043 (Alabama / Cullman County)
State & Place Code: 01/81528 (Alabama / West Point)
Misc. Census Codes ...
West Point is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for West Point.
|<1>||Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2015.|
- Return to Citation
|<2>||Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.|
- Return to Citation
|<3>||A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).|
- Return to Citation
|<4>||The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.|
- Return to Citation
|<5>||The calculated bearing (or the angle) to the 2010 Census location is 98 degrees.|
- Return to Citation
|<6>||The calculated bearing (or the angle) to the GNIS point is 82 degrees.|
- Return to Citation
For additional information, please visit our Glossary for West Point.