Town of Wolf River, Wisconsin
Census Data for Wolf River ...
The most recent Census Estimate<1> was for 2017 and it gives Wolf River a population of 720 people.
The last Decennial Census<2> was in 2010, giving Wolf River a population of 731 people.
The community of Wolf River is located in Langlade County. The 2010 Census gave Langlade County a population of 19,977 people. This means that Wolf River had 3.66% of the county's total population, making it Langlade's 8th most populous community.
At the same time, Wisconsin had a population of 5,686,986 people, meaning that Wolf River had 0.01% of the total population of Wisconsin - making it the state's 1166th most populous community.
When the Census Bureau conducts a census for a community like Wolf River, they draw a boundary around the area in which they are going to conduct their count - this is called a sampling area (or a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the community.
Things like the population, area and housing for Wolf River reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Wolf River might be slightly different, it's best to check with the U.S. Census Bureau if you need precision.
The 2010 Census shows that the sample polygon for Wolf River has a total area of 118.9 square miles [307.8 km²]. Of this total, 116.8 square miles [302.5 km²] is land, with the balance (1.75%) being water (2.08 square miles [5.4 km²]).
Langlade County has a land area of 870 square miles [2,254.9 km²]. At 116.8 square miles [302.5 km²], Wolf River has 13.41% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually at the center of the polygon). At the time of the 2010 Census, the sampling area was located at:
Lat: 45° 14' 6" (or 45.24°) [Map]
Lon: -88° 43' 38" (or -88.73°)
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (731 people) and land area (116.8 square miles [302.5 km²]) values from the 2010 Census, Wolf River had a population density of 6.15 people per square mile [2.37 people/km²].
In comparison, the 2000 Census shows Wolf River had a population of 856 people and a land area of 116.6 square miles [302 km²]. This gives a population density of 7.21 people per square mile [2.78 people/km²]
NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Wolf River. You need to be careful when making such a comparison, the differences are likely to lead to a questionable comparison. More information about the changes can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Wolf River had 898 Housing Units<3> and with its population of 731 people, this averages 0.81 people per Housing Unit.
The 2010 Census shows Wolf River had a land area of 116.8 square miles [302.5 km²]. This translates to 7.56 Housing Units per square mile [2.92 housing units/km²].
From the Census of 2000: Wolf River had 746 Housing Units, a population of 856 people and a land area of 116.6 square miles [302 km²]. This gives a density of 1.15 people per Housing Unit and 6.28 Housing Units per square mile [2.43 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Wolf River and you need to be careful when comparing values between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).
Langlade County ...
The community of Wolf River is located in Langlade County.
The county had a population of 19,977 people at the 2010 Census. With it's population of 731 people, Wolf River represented 3.66% of the county's total.
In addition, where the community of Wolf River has a population density of 6.15 people per square mile [2.37 people/km²], Langlade County averages 22.95 people per square mile [8.86 people/km²].
For more information, please visit our Census Page for Langlade County.
Population Rings for Wolf River ...
To help identify the number of people who live in Wolf River and the surrounding area, we have drawn concentric rings centered on Wolf River. We counted the number of communities within each ring and summed their populations.<4>
| Radius ||No of|
|5 mi [8 km]||2||1,067||-2.47%|
|10 mi [16 km]||6||3,233||-2.06%|
|15 mi [24 km]||15||13,327||+1.83%|
|20 mi [32 km]||20||17,276||+0.83%|
|25 mi [40 km]||37||37,494||-1.78%|
|30 mi [48 km]||55||53,462||-1.65%|
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Wolf River, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Wolf River. It's important to note that from one Census to the next, the shape and location of the polygon can change.
If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
There is only a very minor difference in the sampling area given between the 2010 Census and the 2000 Census.
The 2010 Census shows that the total area for Wolf River was 118.9 square miles [307.8 km²]. Of this total, 116.8 square miles [302.5 km²] is land, with the balance (1.75%) being water (2.08 square miles [5.4 km²]).
The 2000 Census shows a total area of 118.8 square miles [307.6 km²]. Of this total, 116.6 square miles [302 km²] is land, with the balance (1.83%) being water (2.18 square miles [5.6 km²]).
While generally coinciding with the GPS location (latitude/longitude) of Wolf River, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Wolf River.
For the 2010 Census, the location was given as:
Lat: 45.235067° (or 45°14'6" N) [Map]
Lon: -88.727385° (or -88°43'38" W)
For the 2000 Census, the location given was:
Lat: 45.211554° (or 45°12'41" N) [Map]
Lon: -88.742591° (or -88°44'33" W)
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 9,419 feet to the northeast<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#1584468) to Wolf River. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Wolf River. The GNIS point has been mapped to the latitude/longitude:
Lat: 45.244968° (or 45°14'41" N) [Map]
Lon: -88.734829° (or -88°44'5" W)
The GSP location given for the 2010 Census lies 4,084 feet to the southeast<6> of the point given by the GNIS for Wolf River. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Wolf River.
Miscellaneous Information for Wolf River ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has referenced one (or more) of the following identifiers when referring to either Langlade County or the community of Wolf River:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Wolf River:
GNIS ID for Wolf River: 1584468
GNIS ID for Langlade County: 1581093
GNIS ID for Wisconsin: 1779806
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 55 (Wisconsin)
County Code: 067 (Langlade County)
Place Code: 88450 (Wolf River)
State & County Code: 55/067 (Wisconsin / Langlade County)
State & Place Code: 55/88450 (Wisconsin / Wolf River)
Misc. Census Codes ...
Wolf River is located in Census Region #2 (the Midwest Region) and Division #3 (the East North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Wolf River.
|<1>||Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2017.|
- Return to Citation
|<2>||Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.|
- Return to Citation
|<3>||A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).|
- Return to Citation
|<4>||The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.|
- Return to Citation
|<5>||The calculated bearing (or angle) to the 2010 Census location is 335 degrees and a distance of 9,419 feet.|
- Return to Citation
|<6>||The calculated bearing (or angle) to the GNIS point is 207 degrees and a distance of 4,084 feet.|
- Return to Citation