RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Bedford County >> Hailey Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Hailey Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hailey Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Hailey Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Willow Grove
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Willow Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Willow Grove
    • Willow Grove is located in Bedford County
  • Cortner
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cortner
    • Cortner is located in Bedford County
  • Haley
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haley
    • Haley is located in Bedford County
  • Normandy
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Normandy
    • Normandy is located in Bedford County
    • Population from the 2020 Census: 140 people
    • Jump to TripAdvisor's Tourism page for Normandy <3>
  • Raus
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for Raus
    • Raus is located in Bedford County
  • Cascade Hollow
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for Cascade Hollow
    • Cascade Hollow is located in Bedford County
  • Wartrace
    (4 miles [6.4 km] to the north)
  • Homaway Village
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Homaway Village
    • Homaway Village is located in Coffee County
  • Shelbyville
    (7 miles [11.3 km] to the west)
  • Bell Buckle
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bell Buckle
    • Bell Buckle is located in Bedford County
    • Population from the 2020 Census: 537 people
    • Jump to TripAdvisor's Tourism page for Bell Buckle <3>
  • Countyline
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Countyline have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Countyline
    • Countyline is located in Moore County
  • Tullahoma
    (9 miles [14.5 km] to the southeast)
  • Busy Corner
    (10 miles [16.1 km] to the northeast)
    • Jump to our Gazetteer entry for Busy Corner
    • Busy Corner is located in Coffee County
  • Lynchburg
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lynchburg
    • Lynchburg is located in Moore County
    • Jump to TripAdvisor's Tourism page for Lynchburg <3>
  • Belmont
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belmont
    • Belmont is located in Coffee County
  • Beechgrove
    (12 miles [19.3 km] to the north)
  • Royal Oaks
    (13 miles [20.9 km] to the east)
    • Jump to our Gazetteer entry for Royal Oaks
    • Royal Oaks is located in Coffee County
  • Manchester
    (13 miles [20.9 km] to the east)
  • Anchor Mill ‑ Historic
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Anchor Mill
    • Anchor Mill is located in Bedford County
  • Gossburg
    (15 miles [24.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gossburg
    • Gossburg is located in Coffee County
  • Winchester Springs
    (16 miles [25.7 km] to the southeast)
    • Jump to our Gazetteer entry for Winchester Springs
    • Winchester Springs is located in Franklin County
  • Forest Mill
    (16 miles [25.7 km] to the east)
    • Jump to our Gazetteer entry for Forest Mill
    • Forest Mill is located in Coffee County
  • Plainview
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plainview
    • Plainview is located in Rutherford County
  • Estill Springs
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Estill Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Estill Springs
    • Estill Springs is located in Franklin County
    • Population from the 2020 Census: 2,040 people
    • Jump to TripAdvisor's Tourism page for Estill Springs <3>
  • Midland
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Midland
    • Midland is located in Rutherford County
  • Longview
    (17 miles [27.4 km] to the northwest)
    • Jump to our Gazetteer entry for Longview
    • Longview is located in Bedford County
  • Whitaker
    (17 miles [27.4 km] to the west)
    • Jump to our Gazetteer entry for Whitaker
    • Whitaker is located in Bedford County

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hailey Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.4576, Longitude: -86.3236       In this case, the coordinates for the Hailey Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024