Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Cheatham Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Cheatham Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Cheatham Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Berlin
(2 miles [3.2 km] to the north)- Jump to our Gazetteer entry for Berlin
- Berlin is located in Marshall County
- Verona
(3 miles [4.8 km] to the northeast) - Lewisburg
(4 miles [6.4 km] to the southeast)- Jump to our Gazetteer entry for Lewisburg
- Lewisburg is located in Marshall County
- Population from the 2020 Census: 12,559 people
- Jump to TripAdvisor's Tourism page for Lewisburg <3>
- Globe
(5 miles [8 km] to the southwest)- Jump to our Gazetteer entry for Globe
- Globe is located in Marshall County
- Cochran
(5 miles [8 km] to the south) - Oak Hill
(7 miles [11.3 km] to the southeast) - New Town
(8 miles [12.9 km] to the south) - Caney Spring
(8 miles [12.9 km] to the northeast)- Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Culleoka
(8 miles [12.9 km] to the west)- Jump to our Gazetteer entry for Culleoka
- Culleoka is located in Maury County
- Jump to TripAdvisor's Tourism page for Culleoka <3>
- Cornersville
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Cornersville
- Cornersville is located in Marshall County
- Population from the 2020 Census: 1,312 people
- Jump to TripAdvisor's Tourism page for Cornersville <3>
- Whitaker
(11 miles [17.7 km] to the east)- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Chapel Hill
(11 miles [17.7 km] to the northeast)- Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Marshall County
- Population from the 2020 Census: 1,571 people
- Jump to TripAdvisor's Tourism page for Chapel Hill <3>
- Talley
(12 miles [19.3 km] to the southeast) - Lynnville
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Lynnville
- Lynnville is located in Giles County
- Population from the 2020 Census: 311 people
- Jump to TripAdvisor's Tourism page for Lynnville <3>
- Columbia
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Columbia
- Columbia is located in Maury County
- Population from the 2020 Census: 41,826 people
- Jump to TripAdvisor's Tourism page for Columbia <3>
- Unionville
(15 miles [24.1 km] to the northeast)- Jump to our Gazetteer entry for Unionville
- Unionville is located in Bedford County
- Population from the 2010 Census: 1,368 people
- Jump to TripAdvisor's Tourism page for Unionville <3>
- Holts Corner
(15 miles [24.1 km] to the northeast)- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Broadview
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Broadview
- Broadview is located in Maury County
- Southport
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Southport
- Southport is located in Maury County
- Estimated population in 2014: 3,110 people
- Bufords
(16 miles [25.7 km] to the southwest) - Delina
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Delina
- Delina is located in Marshall County
- Petersburg
(16 miles [25.7 km] to the southeast)- Jump to our Gazetteer entry for Petersburg
- Petersburg is located in Lincoln County
- Population from the 2020 Census: 576 people
- Jump to TripAdvisor's Tourism page for Petersburg <3>
- Anchor Mill ‑ Historic
(16 miles [25.7 km] to the east)- Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Duplex
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Duplex
- Duplex is located in Williamson County
- New Town
(18 miles [29 km] to the north) - Spring Hill
(18 miles [29 km] to the north)- Jump to our Gazetteer entry for Spring Hill
- Spring Hill is located in Williamson County
- Population from the 2020 Census: 46,152 people
- Jump to TripAdvisor's Tourism page for Spring Hill <3>
- Ashwood
(18 miles [29 km] to the west)
Off-the-Road Links ...
The official website for Marshall County: www.marshallcountytn.com/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Cheatham Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.4995, Longitude: -86.8269 In this case, the coordinates for the Cheatham Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |