RoadsideThoughts |
A Gazetteer for the United States and Canada |
Home >> State of New Hampshire >> Belknap County >> Allens Mills >> Summary | Index... |
Summary for Allens MillsAbout Allens Mills (Click for our profile page) Located in: Belknap County (see below) Typical Abbreviation: Allens Mls. Time Zone: Allens Mills lies in the Eastern Time Zone (EST/EDT) Telephone Area Code: (603) Elevation: 570 feet [173.74 m] above sea level<1> GPS Coordinates (Latitude/Longitude)<2> For the purpose of mapping and calculating distances, we have chosen the following reference point for Allens Mills: Lat: 43.408800° (or 43°24'31" N) Lon: -71.451600° (or -71°27'5" W) USGS Topo Map: Belmont<3> Federal GNIS/FIPS Codes for Allens Mills GNIS ID: 865219 FIPS State / Place Code: 33 / 00620 (For more about Federal Codes, see our Misc Page for Allens Mills) About Belknap County The community of Laconia is the County Seat for Belknap County. From the 2010 US Census (For more detail, see our Census Page for Belknap) Population
Total Area:<5> 468.6 sq. miles [1,213.6 km²] - of which 14.59% is water (68.3 sq. miles [177 km²]) Housing Units: <6> 37,386 Official Website: www.belknapcounty.org/ Federal GNIS/FIPS Codes for Belknap GNIS ID: 873174 FIPS State / County Code: 33 / 001 (For more about Federal Codes, see our Misc Page for Allens Mills) About New Hampshire From the US Census Population
Websites for State of New Hampshire Official Website: https://www.nh.gov/ Tourism: https://www.visitnh.gov/ Parks: https://www.nhstateparks.org/ Fishing & Hunting: https://wildlife.state.nh.us/ Federal GNIS/FIPS Codes for State of New Hampshire GNIS ID: 1779794 FIPS State: 33 (For more about Federal Codes, see our Misc Page for Allens Mills) Off-the-Road Links ...Unfortunately, we don't know of a website for Allens Mills. If you can help, please contact us through our Feedback Page. The official website for Belknap County: www.belknapcounty.org/ The official website for State of New Hampshire: https://www.nh.gov/ Footnotes ... |
Thank you for visiting our website.
In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.
This page was last modified/updated: 07 Apr 2024