RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Macon County >> FairviewIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Welcome to Fairview ...

Although we found mention of Fairview during our research, we have little information about it.<1> Given the context of how Fairview was mentioned, we believe that it was a community rather than a locale or some type of landmark. We have done a cursory search and if it was a community, we haven't been able to find any evidence that it still exists..

We've added Fairview to our Gazetteer with the hope that we can develop more information. If you can help us with Fairview, please Contact Us.



The location of Fairview has been provided by the Geographic Names Information System (ie- the GNIS).<2>


Fairview is 3,110 feet [948 m] above sea level.<3> In other words, the altitude of Fairview is about ½ mile above sea level.

Time Zone: The area where we believe that Fairview might be (or was) located is in the Eastern Time Zone (EST/EDT) and observes daylight saving time

We believe that Fairview would be found within the (828) area code.

Communities Also Named Fairview ...

While we believe that this Fairview is located in Macon County, we know of another 7 North Carolina communities named Fairview. Those communities are located in the following counties: Buncombe, Edgecombe, Orange, Rockingham, Rowan, Surry and Union County.

Beyond North Carolina, there are 277 communities that are also named Fairview - they are located in Alabama (20), Alaska, Alberta, Arizona, Arkansas (9), British Columbia (2), California (7), Colorado (4), Connecticut, Delaware, Florida (4), Georgia (10), Idaho (4), Illinois (4), Indiana (5), Iowa (2), Kansas (4), Kentucky (12), Louisiana (2), Manitoba, Maryland (7), Massachusetts, Michigan (2), Minnesota (2), Mississippi (5), Missouri (8), Montana (2), Nebraska (3), Nevada (2), New Hampshire, New Jersey (7), New Mexico (2), New York (4), Nova Scotia, Ohio (12), Oklahoma, Ontario (7), Oregon (6), Pennsylvania (18), Prince Edward Island, Quebec, South Carolina (4), South Dakota (3), Tennessee (28), Texas (16), Utah, Virginia (10), Washington (5), West Virginia (10), Wisconsin (3) and Wyoming (2).

For more information, see our Tidbits & Trivia Page for Fairview.

Communities near Fairview ...

We have created a list of 10 communities that are near Fairview.

  • Franklin
    (15 miles [24.1 km] to the southeast)
  • Andrews
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Andrews have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Andrews
    • Andrews is located in Cherokee County
    • Population from the 2020 Census: 1,855 people
    • Jump to TripAdvisor's Tourism page for Andrews <4>
  • Bryson City
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bryson City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bryson City
    • Bryson City is located in Swain County
    • Population from the 2020 Census: 1,443 people
    • Jump to TripAdvisor's Tourism page for Bryson City <4>
  • Robbinsville
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Robbinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Robbinsville
    • Robbinsville is located in Graham County
    • Population from the 2020 Census: 716 people
    • Jump to TripAdvisor's Tourism page for Robbinsville <4>
  • Hayesville
    (19 miles [30.6 km] to the southwest)
  • Lake Santeetlah
    (14 miles [22.5 km] to the northwest)
    • Jump to our Gazetteer entry for Lake Santeetlah
    • Lake Santeetlah is located in Graham County
    • Population from the 2020 Census: 43 people
    • Lake Santeetlah has also been known as:
    • Santeetla
    • Santeetlah
    • Santultah
    • Thunderbird Mountain
    • Thunderbird
  • Fontana Dam
    (15 miles [24.1 km] to the northwest)
    • Jump to our Gazetteer entry for Fontana Dam
    • Fontana Dam is located in Graham County
    • Population from the 2020 Census: 6 people
    • Fontana Dam has also been known as:
    • Fontana Village
    • Jump to TripAdvisor's Tourism page for Fontana Dam <4>
  • Topton
    (4 miles [6.4 km] to the southwest)
  • Wesser
    (4 miles [6.4 km] to the northeast)
    • Jump to our Gazetteer entry for Wesser
    • Wesser is located in Swain County
  • Bear Creek
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for Bear Creek
    • Bear Creek is located in Graham County

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Fairview. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Fairview.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Fairview. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Fairview.

We also have a detailed list of newspapers that have been published in the area around Fairview. See our Newspapers Page for Fairview.

TripAdvisor Tourism Pages for Fairview ...

Looking for more information about Fairview? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Fairview, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Fairview.

The official website for Macon County: www.maconnc.org/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>If we encounter the name of what might be a community, our methodology is to add that name to our Gazetteer. For example, we might find a sentence like "He went south past Fairview and then turned east". While Fairview could be some kind of landmark, we think that it's more likely to be a community. We've added Fairview as a placeholder with the hope that we'll be able to add more information in the future.

Just as a reminder: Our definition of a community is rather broad and includes those places (or areas) where several families lived and had a name which identified that place. For example, you might hear somebody say that they are going over to Bird Creek to see Pete ... Bird Creek is just a gas station and a couple of homes at the crossroads. While it might not be on the map, everybody in the area knows it by that name.

Places of interest include buildings at a crossroad, several families clustered in a hollow or maybe the location of a way station. It also includes places like mines, lumber camps, ferry crossings, etc. The community might still exist, is now gone or only existed for just a short period of time.

Also keep in mind that Fairview could have been on the original document by mistake, misspelled, the original/alternate name of a community that we've listed elsewhere or was placed in the wrong county. Sometimes a post office or train station would have a different name than the community where it's located, so two names might be referring to the same community - we're working to straighten it all out.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>The elevation is an estimate for the area around Fairview - it will be higher in some places and lower in others.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 10 Mar 2024