RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Stearns County >> Albany >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Minnesota


The Commemorative Quarter for Minnesota







TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Albany. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Albany.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Albany - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Stearns County.

Our list sorts the communities in alphabetical order. There are 37 communities listed:

  • Avon
    (5 miles [8 km] to the east)
    • Jump to our Gazetteer entry for Avon
    • Avon is located in Stearns County
    • Population from the 2020 Census: 1,652 people
    • Jump to TripAdvisor's Tourism page for Avon <2>
  • Bowlus
    (15 miles [24.1 km] to the northeast)
  • Burtrum
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Burtrum have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Burtrum
    • Burtrum is located in Todd County
    • Population from the 2020 Census: 136 people
    • Jump to TripAdvisor's Tourism page for Burtrum <2>
  • Clear Lake
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Clear Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clear Lake
    • Clear Lake is located in Sherburne County
    • Population from the 2020 Census: 729 people
    • Jump to TripAdvisor's Tourism page for Clear Lake <2>
  • Clearwater
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Clearwater have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clearwater
    • Clearwater is located in Wright County
    • Population from the 2020 Census: 1,841 people
    • Jump to TripAdvisor's Tourism page for Clearwater <2>
  • Cold Spring
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cold Spring
    • Cold Spring is located in Stearns County
    • Population from the 2020 Census: 4,350 people
    • Jump to TripAdvisor's Tourism page for Cold Spring <2>
  • Collegeville
    (10 miles [16.1 km] to the east)
  • Eden Valley
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Eden Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eden Valley
    • Eden Valley is located in Meeker County
    • Population from the 2020 Census: 1,038 people
    • Jump to TripAdvisor's Tourism page for Eden Valley <2>
  • Elrosa
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Elrosa have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elrosa
    • Elrosa is located in Stearns County
    • Population from the 2020 Census: 229 people
    • Jump to TripAdvisor's Tourism page for Elrosa <2>
  • Freeport
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Freeport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Freeport
    • Freeport is located in Stearns County
    • Population from the 2020 Census: 671 people
    • Jump to TripAdvisor's Tourism page for Freeport <2>
  • Gilman
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Gilman have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gilman
    • Gilman is located in Benton County
    • Population from the 2020 Census: 216 people
    • Jump to TripAdvisor's Tourism page for Gilman <2>
  • Greenwald
    (14 miles [22.5 km] to the west)
    • Note: The GPS coordinates that we are using for Greenwald have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenwald
    • Greenwald is located in Stearns County
    • Population from the 2020 Census: 224 people
    • Jump to TripAdvisor's Tourism page for Greenwald <2>
  • Grey Eagle
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Grey Eagle have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grey Eagle
    • Grey Eagle is located in Todd County
    • Population from the 2020 Census: 327 people
    • Jump to TripAdvisor's Tourism page for Grey Eagle <2>
  • Holdingford
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Holdingford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holdingford
    • Holdingford is located in Stearns County
    • Population from the 2020 Census: 725 people
    • Jump to TripAdvisor's Tourism page for Holdingford <2>
  • Kimball
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Kimball have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kimball
    • Kimball is located in Stearns County
    • Population from the 2020 Census: 802 people
    • Jump to TripAdvisor's Tourism page for Kimball <2>
  • Little Falls
    (25 miles [40.2 km] to the north)
  • Long Prairie
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Long Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Long Prairie
    • Long Prairie is located in Todd County
    • Population from the 2020 Census: 3,297 people
    • Jump to TripAdvisor's Tourism page for Long Prairie <2>
  • Melrose
    (12 miles [19.3 km] to the west)
  • New London
    (28 miles [45.1 km] to the southwest)
  • New Munich
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for New Munich have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Munich
    • New Munich is located in Stearns County
    • Population from the 2020 Census: 330 people
    • Jump to TripAdvisor's Tourism page for New Munich <2>
  • Paynesville
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Paynesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Paynesville
    • Paynesville is located in Stearns County
    • Population from the 2020 Census: 2,531 people
    • Jump to TripAdvisor's Tourism page for Paynesville <2>
  • Rice
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rice have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rice
    • Rice is located in Benton County
    • Population from the 2020 Census: 1,401 people
    • Jump to TripAdvisor's Tourism page for Rice <2>
  • Richmond
    (12 miles [19.3 km] to the south)
  • Rockville
    (16 miles [25.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockville
    • Rockville is located in Stearns County
    • Population from the 2020 Census: 2,599 people
    • Jump to TripAdvisor's Tourism page for Rockville <2>
  • Roscoe
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Roscoe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roscoe
    • Roscoe is located in Stearns County
    • Population from the 2020 Census: 114 people
    • Jump to TripAdvisor's Tourism page for Roscoe <2>
  • Royalton
    (19 miles [30.6 km] to the northeast)
  • Saint Cloud
    (20 miles [32.2 km] to the east)
  • Saint Joseph
    (12 miles [19.3 km] to the east)
  • Saint Martin
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Saint Martin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint Martin
    • Saint Martin is located in Stearns County
    • Population from the 2020 Census: 352 people
    • Jump to TripAdvisor's Tourism page for Saint Martin <2>
  • Sartell
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Sartell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sartell
    • Sartell is located in Stearns County
    • Population from the 2020 Census: 19,079 people
    • Jump to TripAdvisor's Tourism page for Sartell <2>
  • Sauk Centre
    (19 miles [30.6 km] to the west)
  • Sauk Rapids
    (19 miles [30.6 km] to the east)
  • South Haven
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for South Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Haven
    • South Haven is located in Wright County
    • Population from the 2020 Census: 189 people
    • Jump to TripAdvisor's Tourism page for South Haven <2>
  • Swanville
    (20 miles [32.2 km] to the north)
  • Upsala
    (12 miles [19.3 km] to the north)
  • Waite Park
    (17 miles [27.4 km] to the east)
  • Watkins
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Watkins have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Watkins
    • Watkins is located in Meeker County
    • Population from the 2020 Census: 958 people
    • Jump to TripAdvisor's Tourism page for Watkins <2>

The official website for Albany: www.ci.albany.mn.us/

The official website for Stearns County: www.co.stearns.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Albany) to Point B.Our distance measurements begin at a specific point in Albany. The point we use is located at these GPS coordinates - Latitude: 45.6287, Longitude: -94.5683       In this case, the coordinates for Albany have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024