Welcome to Strum Bay ...
So far, we found very little information about Strum Bay. The little that we've found leads us believe that the community is historic.<1>
We've added Strum Bay to our Gazetteer with the hope that we can develop more information. If you can help us with Strum Bay, please Contact Us.
Strum Bay would have been located within present day Liberty County<2>.
The location of Strum Bay has been provided by the Geographic Names Information System (ie- the GNIS).<3>
While the community is gone, the present day location for Strum Bay is 80 feet [24 m] above sea level.<4>.
Time Zone: The area where Strum Bay was located is in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Strum Bay would have been located in the (912) area code.
Websites for Strum Bay ...
Chamber of Commerce: www.libertycounty.org/
Although we don't have any websites that are specific to Strum Bay, the following might be of interest:
Communities near Strum Bay ...
We have created a list of 10 communities that are near Strum Bay.
- Hinesville
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Hinesville
- Hinesville is located in Liberty County
- Population from the 2020 Census: 34,085 people
- Jump to TripAdvisor's Tourism page for Hinesville <5>
- Statesborough
(14 miles [22.5 km] to the north)- Note: The GPS coordinates that we are using for Statesborough have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statesborough
- Statesborough is located in Bulloch County
- Estimated population in 2019: 32,954 people
- Garden Acres
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Garden Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garden Acres
- Garden Acres is located in Liberty County
- Estimated population in 2019: 8,713 people
- Glennville
(18 miles [29 km] to the west)- Jump to our Gazetteer entry for Glennville
- Glennville is located in Tattnall County
- Population from the 2020 Census: 5,014 people
- Jump to TripAdvisor's Tourism page for Glennville <5>
- Walthourville
(17 miles [27.4 km] to the south)- Note: The GPS coordinates that we are using for Walthourville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walthourville
- Walthourville is located in Liberty County
- Population from the 2020 Census: 4,065 people
- Jump to TripAdvisor's Tourism page for Walthourville <5>
- Pembroke
(8 miles [12.9 km] to the north)- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Bryan County
- Population from the 2020 Census: 2,683 people
- Jump to TripAdvisor's Tourism page for Pembroke <5>
- Donald
(18 miles [29 km] to the southwest)- Jump to our Gazetteer entry for Donald
- Donald is located in Long County
- Estimated population in 2019: 2,466 people
- Claxton
(18 miles [29 km] to the northwest)- Jump to our Gazetteer entry for Claxton
- Claxton is located in Evans County
- Population from the 2020 Census: 2,216 people
- Jump to TripAdvisor's Tourism page for Claxton <5>
- Midway
(19 miles [30.6 km] to the southeast)- Jump to our Gazetteer entry for Midway
- Midway is located in Liberty County
- Population from the 2020 Census: 2,015 people
- Jump to TripAdvisor's Tourism page for Midway <5>
- Trinity
(7 miles [11.3 km] to the southeast)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Strum Bay. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Strum Bay.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Strum Bay. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Strum Bay.
We also have a detailed list of newspapers that have been published in the area around Strum Bay. See our Newspapers Page for Strum Bay.
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Strum Bay, please let us know so that we can improve our accuracy. |
| <2> | If you're interested in how the shape of Georgia's counties, including Liberty, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | The elevation is an estimate for the area around Strum Bay - it will be higher in some places and lower in others. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |