TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Allentown. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Allentown.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Allentown - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 28 communities listed:
- Bonaire
(21 miles [33.8 km] to the west)
- Cadwell
(20 miles [32.2 km] to the southeast)
- Centerville
(27 miles [43.5 km] to the west)
- Chester
(14 miles [22.5 km] to the south)
- Clinchfield
(27 miles [43.5 km] to the southwest)
- Cochran
(16 miles [25.7 km] to the southwest)
- Danville
(Less than 2 miles to the northwest)
- Dexter
(14 miles [22.5 km] to the southeast)
- Dry Branch
(21 miles [33.8 km] to the northwest)
- Dublin
(19 miles [30.6 km] to the east)
- Dudley
(9 miles [14.5 km] to the east)
- East Dublin
(20 miles [32.2 km] to the east)
- Eastman
(27 miles [43.5 km] to the south)
- Gordon
(21 miles [33.8 km] to the north)
- Hawkinsville
(25 miles [40.2 km] to the southwest)
- Irwinton
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Irwinton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irwinton
- Irwinton is located in Wilkinson County
- Population from the 2020 Census: 546 people
- Jump to TripAdvisor's Tourism page for Irwinton <2>
- Jeffersonville
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Jeffersonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jeffersonville
- Jeffersonville is located in Twiggs County
- Population from the 2020 Census: 931 people
- Jump to TripAdvisor's Tourism page for Jeffersonville <2>
- Kathleen
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Kathleen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kathleen
- Kathleen is located in Houston County
- Jump to TripAdvisor's Tourism page for Kathleen <2>
- Macon
(29 miles [46.7 km] to the northwest)
- McIntyre
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for McIntyre have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIntyre
- McIntyre is located in Wilkinson County
- Population from the 2020 Census: 598 people
- Jump to TripAdvisor's Tourism page for McIntyre <2>
- Montrose
(4 miles [6.4 km] to the southeast)
- Oconee
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Oconee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oconee
- Oconee is located in Washington County
- Population from the 2020 Census: 240 people
- Jump to TripAdvisor's Tourism page for Oconee <2>
- Perry
(30 miles [48.3 km] to the west)
- Plainfield
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Plainfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainfield
- Plainfield is located in Dodge County
- Estimated population in 2019: 716 people
- Jump to TripAdvisor's Tourism page for Plainfield <2>
- Rentz
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Rentz have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rentz
- Rentz is located in Laurens County
- Population from the 2020 Census: 286 people
- Jump to TripAdvisor's Tourism page for Rentz <2>
- Toomsboro
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Toomsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toomsboro
- Toomsboro is located in Wilkinson County
- Population from the 2020 Census: 478 people
- Jump to TripAdvisor's Tourism page for Toomsboro <2>
- Warner Robins
(23 miles [37 km] to the west)
- Wrightsville
(30 miles [48.3 km] to the east)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Allentown. If you can help, please contact us through our Feedback Page.
The official website for Bleckley County: www.bleckley.org/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Allentown) to Point B.Our distance measurements begin at a specific point in Allentown. The point we use is located at these GPS coordinates - Latitude: 32.5929, Longitude: -83.2257 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |