Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Walton Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Walton Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Walton Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Clarksville
(Less than 2 miles to the southeast)- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Johnson County
- Population from the 2020 Census: 9,721 people
- Jump to TripAdvisor's Tourism page for Clarksville <2>
- Union City
(2 miles [3.2 km] to the west)- Note: The GPS coordinates that we are using for Union City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union City
- Union City is located in Johnson County
- Spadra
(4 miles [6.4 km] to the south) - Ludwig
(4 miles [6.4 km] to the northeast)- Jump to our Gazetteer entry for Ludwig
- Ludwig is located in Johnson County
- Lone Pine
(4 miles [6.4 km] to the north)- Jump to our Gazetteer entry for Lone Pine
- Lone Pine is located in Johnson County
- Harmony
(5 miles [8 km] to the northwest) - Morrison Bluff
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for Morrison Bluff
- Morrison Bluff is located in Logan County
- Population from the 2020 Census: 78 people
- Lamar
(6 miles [9.7 km] to the southeast)- Jump to our Gazetteer entry for Lamar
- Lamar is located in Johnson County
- Population from the 2020 Census: 1,729 people
- Jump to TripAdvisor's Tourism page for Lamar <2>
- Hartman
(7 miles [11.3 km] to the southwest) - Scranton
(8 miles [12.9 km] to the south)- Jump to our Gazetteer entry for Scranton
- Scranton is located in Logan County
- Population from the 2020 Census: 233 people
- Coal Hill
(9 miles [14.5 km] to the west)- Note: The GPS coordinates that we are using for Coal Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coal Hill
- Coal Hill is located in Johnson County
- Population from the 2020 Census: 1,003 people
- Jump to TripAdvisor's Tourism page for Coal Hill <2>
- Hagarville
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Hagarville
- Hagarville is located in Johnson County
- Strawberry
(9 miles [14.5 km] to the northeast)- Note: The GPS coordinates that we are using for Strawberry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Strawberry
- Strawberry is located in Johnson County
- Knoxville
(10 miles [16.1 km] to the southeast) - Cotton Town
(11 miles [17.7 km] to the southwest)- Note: The GPS coordinates that we are using for Cotton Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cotton Town
- Cotton Town is located in Logan County
- Ozone
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Ozone
- Ozone is located in Johnson County
- Jump to TripAdvisor's Tourism page for Ozone <2>
- Batson
(12 miles [19.3 km] to the northwest) - Alix
(13 miles [20.9 km] to the west) - Ross
(13 miles [20.9 km] to the east) - Sand Ridge
(14 miles [22.5 km] to the south)- Note: The GPS coordinates that we are using for Sand Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sand Ridge
- Sand Ridge is located in Logan County
- Oark
(14 miles [22.5 km] to the north)- Note: The GPS coordinates that we are using for Oark have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oark
- Oark is located in Johnson County
- Jump to TripAdvisor's Tourism page for Oark <2>
- New Blaine
(14 miles [22.5 km] to the south)- Jump to our Gazetteer entry for New Blaine
- New Blaine is located in Logan County
- Jump to TripAdvisor's Tourism page for New Blaine <2>
- Wiederkehr Village
(14 miles [22.5 km] to the west)- Note: The GPS coordinates that we are using for Wiederkehr Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wiederkehr Village
- Wiederkehr Village is located in Franklin County
- Population from the 2020 Census: 48 people
- Denning
(15 miles [24.1 km] to the west) - Subiaco
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Subiaco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Subiaco
- Subiaco is located in Logan County
- Population from the 2020 Census: 554 people
- Jump to TripAdvisor's Tourism page for Subiaco <2>
- Silex
(15 miles [24.1 km] to the east) - Altus
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Altus
- Altus is located in Franklin County
- Population from the 2020 Census: 729 people
- Jump to TripAdvisor's Tourism page for Altus <2>
Off-the-Road Links ...
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Walton Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.4854, Longitude: -93.4985 In this case, the coordinates for the Walton Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |