RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Arkansas >> Franklin County >> Anice >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Arkansas

The Commemorative Quarter for Arkansas





Our Genealogy Helper

Introduction ...

So far, we found very little information about Anice. The little that we've found leads us believe that the community is historic.<1>

We've added Anice to our Gazetteer with the hope that we can develop more information. If you can help us with Anice, please Contact Us.

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Anice (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Anice. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Although our information shows that the community of Anice is historic, it would have been located within present day Franklin County.

To see how the shape of Arkansas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Franklin County: Crawford, Johnson, Logan, Madison & Sebastian.

Below are the counties that are near Anice. For each of these counties, we show a sample of those communities that are closest to Anice:

  • Franklin County     (The home county of Anice)
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Cecil
      (4 miles [6.4 km] to the east)
      • Note: The GPS coordinates that we are using for Cecil have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cecil
      • Cecil is located in Franklin County
    • Donald ‑ Historic
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Donald have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Donald
      • Donald is located in Franklin County
    • Charleston
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Charleston have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Charleston
      • Charleston is located in Franklin County
      • Population from the 2020 Census: 2,500 people
      • Jump to TripAdvisor's Tourism page for Charleston <3>
    • Branch
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Branch
      • Branch is located in Franklin County
      • Population from the 2020 Census: 345 people
      • Jump to TripAdvisor's Tourism page for Branch <3>
    • Webb City
      (10 miles [16.1 km] to the east)
      • Note: The GPS coordinates that we are using for Webb City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Webb City
      • Webb City is located in Franklin County
    • Ozark
      (11 miles [17.7 km] to the east)
      • Jump to our Gazetteer entry for Ozark
      • Ozark is located in Franklin County
      • Population from the 2020 Census: 3,626 people
      • Jump to TripAdvisor's Tourism page for Ozark <3>
    • Felkner Town
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Felkner Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Felkner Town
      • Felkner Town is located in Franklin County
    • Altus
      (14 miles [22.5 km] to the east)
    • Denning
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Denning have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Denning
      • Denning is located in Franklin County
      • Population from the 2020 Census: 250 people
    • Watalula
      (14 miles [22.5 km] to the northeast)
      • Jump to our Gazetteer entry for Watalula
      • Watalula is located in Franklin County
    • Wiederkehr Village
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Wiederkehr Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wiederkehr Village
      • Wiederkehr Village is located in Franklin County
      • Population from the 2020 Census: 48 people
    • Alix
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Alix have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alix
      • Alix is located in Franklin County
  • Crawford County
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Mulberry
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mulberry have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mulberry
      • Mulberry is located in Crawford County
      • Population from the 2020 Census: 1,694 people
      • Jump to TripAdvisor's Tourism page for Mulberry <3>
    • Dyer
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dyer have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dyer
      • Dyer is located in Crawford County
      • Population from the 2020 Census: 893 people
      • Jump to TripAdvisor's Tourism page for Dyer <3>
    • New Town
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Crawford County
    • Alma
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Alma have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alma
      • Alma is located in Crawford County
      • Population from the 2020 Census: 5,887 people
      • Jump to TripAdvisor's Tourism page for Alma <3>
    • Kibler
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Kibler have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kibler
      • Kibler is located in Crawford County
      • Population from the 2020 Census: 1,028 people
    • Concord
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Concord
      • Concord is located in Crawford County
    • Rudy
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rudy have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rudy
      • Rudy is located in Crawford County
      • Population from the 2020 Census: 149 people
    • Wright Town
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Wright Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wright Town
      • Wright Town is located in Crawford County
    • Mountainburg
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mountainburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mountainburg
      • Mountainburg is located in Crawford County
      • Population from the 2020 Census: 612 people
      • Jump to TripAdvisor's Tourism page for Mountainburg <3>
    • Locke
      (17 miles [27.4 km] to the north)
      • Jump to our Gazetteer entry for Locke
      • Locke is located in Crawford County
    • Van Buren
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Buren
      • Van Buren is located in Crawford County
      • Population from the 2020 Census: 23,812 people
      • Jump to TripAdvisor's Tourism page for Van Buren <3>
    • Chester
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Chester have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chester
      • Chester is located in Crawford County
      • Population from the 2020 Census: 159 people
      • Jump to TripAdvisor's Tourism page for Chester <3>
  • Johnson County
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Coal Hill
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Coal Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Coal Hill
      • Coal Hill is located in Johnson County
      • Population from the 2020 Census: 1,003 people
      • Jump to TripAdvisor's Tourism page for Coal Hill <3>
    • Hartman
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Hartman have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hartman
      • Hartman is located in Johnson County
      • Population from the 2020 Census: 552 people
    • Batson
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Batson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Batson
      • Batson is located in Johnson County
    • Union City
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Union City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Union City
      • Union City is located in Johnson County
    • Harmony
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harmony
      • Harmony is located in Johnson County
    • Lone Pine
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Lone Pine
      • Lone Pine is located in Johnson County
    • Spadra
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Spadra have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spadra
      • Spadra is located in Johnson County
    • Oark
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oark have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oark
      • Oark is located in Johnson County
      • Jump to TripAdvisor's Tourism page for Oark <3>
  • Logan County
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Ratcliff
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Ratcliff have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ratcliff
      • Ratcliff is located in Logan County
      • Population from the 2020 Census: 182 people
      • Jump to TripAdvisor's Tourism page for Ratcliff <3>
    • Caulksville
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Caulksville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caulksville
      • Caulksville is located in Logan County
      • Population from the 2020 Census: 208 people
    • Carbon City
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Carbon City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carbon City
      • Carbon City is located in Logan County
    • Paris
      (18 miles [29 km] to the southeast)
    • Booneville
      (20 miles [32.2 km] to the south)
    • Cotton Town
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Cotton Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cotton Town
      • Cotton Town is located in Logan County
    • Magazine
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Magazine have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Magazine
      • Magazine is located in Logan County
      • Population from the 2020 Census: 824 people
    • Subiaco
      (23 miles [37 km] to the east)
      • Note: The GPS coordinates that we are using for Subiaco have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Subiaco
      • Subiaco is located in Logan County
      • Population from the 2020 Census: 554 people
      • Jump to TripAdvisor's Tourism page for Subiaco <3>
    • Lucas
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Lucas
      • Lucas is located in Logan County
    • Golden City ‑ Historic
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Golden City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Golden City
      • Golden City is located in Logan County
    • Blue Mountain
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Blue Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blue Mountain
      • Blue Mountain is located in Logan County
      • Population from the 2020 Census: 120 people
    • Corley
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Corley have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Corley
      • Corley is located in Logan County
  • Madison County
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Combs
      (29 miles [46.7 km] to the north)
    • Delaney
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for Delaney
      • Delaney is located in Madison County
    • Brashears
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Brashears
      • Brashears is located in Madison County
    • Saint Paul
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Saint Paul have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Paul
      • Saint Paul is located in Madison County
      • Population from the 2020 Census: 110 people
  • Sebastian County
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Ursula
      (8 miles [12.9 km] to the southwest)
      • Jump to our Gazetteer entry for Ursula
      • Ursula is located in Sebastian County
    • Lavaca
      (10 miles [16.1 km] to the southwest)
      • Jump to our Gazetteer entry for Lavaca
      • Lavaca is located in Sebastian County
      • Population from the 2020 Census: 2,439 people
      • Jump to TripAdvisor's Tourism page for Lavaca <3>
    • Bloomer
      (11 miles [17.7 km] to the southwest)
      • Jump to our Gazetteer entry for Bloomer
      • Bloomer is located in Sebastian County
    • Central City
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Central City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Central City
      • Central City is located in Sebastian County
      • Population from the 2020 Census: 497 people
    • Barling
      (17 miles [27.4 km] to the southwest)
    • Greenwood
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Greenwood
      • Greenwood is located in Sebastian County
      • Population from the 2020 Census: 9,396 people
    • Fort Smith
      (20 miles [32.2 km] to the west)
    • Bonanza
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bonanza have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bonanza
      • Bonanza is located in Sebastian County
      • Population from the 2020 Census: 560 people
    • Hackett
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hackett have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hackett
      • Hackett is located in Sebastian County
      • Population from the 2020 Census: 837 people
      • Jump to TripAdvisor's Tourism page for Hackett <3>
    • Huntington
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Huntington have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Huntington
      • Huntington is located in Sebastian County
      • Population from the 2020 Census: 615 people
    • Mansfield
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mansfield have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mansfield
      • Mansfield is located in Sebastian County
      • Population from the 2020 Census: 1,089 people
      • Jump to TripAdvisor's Tourism page for Mansfield <3>
    • Midland
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Midland
      • Midland is located in Sebastian County
      • Population from the 2020 Census: 322 people
  • Washington County
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Winslow
      (26 miles [41.8 km] to the north)
    • Hazel Valley
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for Hazel Valley
      • Hazel Valley is located in Washington County
    • Brentwood
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Brentwood
      • Brentwood is located in Washington County
  • Le Flore County (OK)
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Arkoma
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Arkoma
      • Arkoma is located in Le Flore County (OK)
      • Population from the 2020 Census: 1,894 people
      • Jump to TripAdvisor's Tourism page for Arkoma <3>
    • Pocola
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pocola have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pocola
      • Pocola is located in Le Flore County (OK)
      • Population from the 2020 Census: 4,153 people
      • Jump to TripAdvisor's Tourism page for Pocola <3>
    • Braden
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Braden
      • Braden is located in Le Flore County (OK)
  • Sequoyah County (OK)
    • The following are listed by their distance from Anice, with the one closest to Anice listed first.
    • Moffett
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Moffett have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Moffett
      • Moffett is located in Sequoyah County (OK)
      • Population from the 2020 Census: 122 people
      • Jump to TripAdvisor's Tourism page for Moffett <3>
    • Roland
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Roland have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roland
      • Roland is located in Sequoyah County (OK)
      • Population from the 2020 Census: 4,020 people
      • Jump to TripAdvisor's Tourism page for Roland <3>
    • Remy
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Remy have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Remy
      • Remy is located in Sequoyah County (OK)
    • Short
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Short have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Short
      • Short is located in Sequoyah County (OK)

For an expanded list of the communities that are closest to Anice, see our County-by-County Page for Anice.

Newspapers Published in Anice ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 85 newspapers that have been published in the area around Anice.

Although we're unaware of any newspapers that were published in the immediate area of Anice, there are papers which were published within 22 miles [35.4 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Anice.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Anice:

Cemeteries Near Anice ...

Below are cemeteries that are in the vicinity of Anice.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Anice covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Anice, with the one closest to Anice listed first.

  • Oak Grove Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Oak Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Oak Grove Cemetery
  • Browns Chapel Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Browns Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Browns Chapel Cemetery
  • Tate Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Tate Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Tate Cemetery
  • Berkley Cemetery
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for the Berkley Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Berkley Cemetery
  • Patterson Cemetery
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Patterson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Patterson Cemetery
  • Hight Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the Hight Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hight Cemetery
  • Pleasant View Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the Pleasant View Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pleasant View Cemetery
  • Hepseby Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Hepseby Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hepseby Cemetery
  • Hickory Ridge Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Hickory Ridge Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hickory Ridge Cemetery
  • Price Springs Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Price Springs Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Price Springs Cemetery
  • Arbuckle Cemetery
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for the Arbuckle Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Arbuckle Cemetery
  • Carruth Cemetery
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Carruth Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Carruth Cemetery
  • Continue List   (368 more) ...
    • Killings Cemetery
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Killings Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Killings Cemetery
    • King Cemetery
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for the King Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the King Cemetery
    • Alexander Cemetery
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Alexander Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Alexander Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.

While we didn't find Anice in the Atlas, the following 1895 communities would have been found near the current location of Anice.

These communities are listed based on their distance from Anice, with the one closest to Anice listed first.

  • Vesta
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Vesta have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vesta
    • Vesta is located in Franklin County
  • Sub Rosa ‑ Historic
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sub Rosa have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sub Rosa
    • Sub Rosa is located in Franklin County
  • Cecil
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Cecil have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cecil
    • Cecil is located in Franklin County
  • Dahoma ‑ Historic
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dahoma have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dahoma
    • Dahoma is located in Franklin County
  • Beverly
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Beverly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beverly
    • Beverly is located in Sebastian County
  • Island
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Island have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Island
    • Island is located in Sebastian County
  • Donald ‑ Historic
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Donald have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Donald
    • Donald is located in Franklin County
  • Poping
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Poping have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Poping
    • Poping is located in Franklin County
  • Dyer
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Dyer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dyer
    • Dyer is located in Crawford County
    • Population from the 2020 Census: 893 people
    • Jump to TripAdvisor's Tourism page for Dyer <3>
  • Charleston
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Charleston have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Charleston
    • Charleston is located in Franklin County
    • Population from the 2020 Census: 2,500 people
    • Jump to TripAdvisor's Tourism page for Charleston <3>
  • Lavaca
    (10 miles [16.1 km] to the southwest)
    • Jump to our Gazetteer entry for Lavaca
    • Lavaca is located in Sebastian County
    • Population from the 2020 Census: 2,439 people
    • Jump to TripAdvisor's Tourism page for Lavaca <3>
  • Etna
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Etna have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Etna
    • Etna is located in Franklin County
  • Continue List   (18 more) ...
    • Webb City
      (10 miles [16.1 km] to the east)
      • Note: The GPS coordinates that we are using for Webb City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Webb City
      • Webb City is located in Franklin County
    • Cravens
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cravens have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cravens
      • Cravens is located in Franklin County
    • White Rock
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for White Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Rock
      • White Rock is located in Franklin County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Anice. See our List of 1890's Communities around Anice.

The official website for State of Arkansas: https://portal.arkansas.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Anice, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Anice) to Point B.Our distance measurements begin at a specific point in Anice. The point we use is located at these GPS coordinates - Latitude: 35.4295, Longitude: -94.0210       In this case, the coordinates for Anice have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024