Census Data for Hobson City ...
The most recent Census Estimate<1> was for 2015 and it gives Hobson City a population of 768 people.
The last Decennial Census<2> was in 2010, giving Hobson City a population of 771 people.
The town of Hobson City is located in Calhoun County. The 2010 Census gave Calhoun County a population of 118,572 people. This means that Hobson City had 0.65% of the county's total population, making it Calhoun's 7th most populous community.
At the same time, Alabama had a population of 4,779,736 people, meaning that Hobson City had 0.02% of the total population of Alabama - making it the state's 282nd most populous community.
When the Census Bureau conducts a census for a town like Hobson City, they draw a boundary around the area in which they are going to conduct their count - this is called a sampling area (or a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.
Things like the population, area and housing for Hobson City reflect the sampling area. Since the shape of the sampling area and the actual boundaries of&$160;Hobson City might be slightly different, it's best to check with the U.S. Census Bureau if you need precision.
The 2010 Census shows that the sample polygon for Hobson City has a total area of 1.04 square miles [2.7 km²]. Of this total, a small amount of the area is covered by water (0 square miles [0 km²]).
Calhoun County has a land area of 605 square miles [1,569.2 km²]. At 1.04 square miles [2.7 km²], Hobson City has 0.17% of the county's total land area.
Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually at the center of the polygon). At the time of the 2010 Census, the sampling area was located at:
Lat: 33° 37' 6" (or 33.62°)
Lon: -85° 50' 36" (or -85.84°)
More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Population Density ...
Using the population (771 people) and land area (1.04 square miles [2.7 km²]) values from the 2010 Census, Hobson City had a population density of 739 people per square mile [285.4 people/km²].
In comparison, the 2000 Census shows Hobson City had a population of 878 people and a land area of 1.09 square miles [2.8 km²]. This gives a population density of 802 people per square mile [310 people/km²]
NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Hobson City. You need to be careful when making such a comparison, the differences are likely to lead to a questionable comparison. More information about the nature of these differences can be found in the section Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Hobson City had 358 Housing Units<3> and with its population of 771 people, this averages 2.15 people per Housing Unit.
The 2010 Census shows Hobson City had a land area of 1.04 square miles [2.7 km²]. This translates to 343.2 Housing Units per square mile [132.5 housing units/km²].
From the Census of 2000: Hobson City had 415 Housing Units, a population of 878 people and a land area of 1.09 square miles [2.8 km²]. This gives a density of 2.12 people per Housing Unit and 379.5 Housing Units per square mile [146.5 housing units/km²].
NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Hobson City and you need to be careful when comparing numbers between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).
Calhoun County ...
The community of Hobson City is located in Calhoun County.
The county had a population of 118,572 people at the 2010 Census. With it's population of 771 people, Hobson City represented 0.65% of the county's total.
In addition, where the town of Hobson City has a population density of 739 people per square mile [285.4 people/km²], Calhoun County averages 195.7 people per square mile [75.6 people/km²].
For more information, please visit our Census Page for Calhoun County.
Population Rings for Hobson City ...
To help identify the number of people who live in Hobson City and the surrounding area, we have drawn concentric rings centered on Hobson City. We counted the number of communities within each ring and summed their populations.<4>
|5 mi [8 km]||3||44,364||-1.9%|
|10 mi [16 km]||5||48,714||-1.7%|
|15 mi [24 km]||7||62,082||-1.88%|
|20 mi [32 km]||14||92,278||-0.81%|
|25 mi [40 km]||23||142,828||---|
|30 mi [48 km]||29||189,363||-0.42%|
US Census QuickFacts ...
The Census Bureau has created documents containing demographic information called QuickFacts. Although they haven't created a QuickFact for Hobson City, there are QuickFacts available for the following nearby communities:
For more about neighboring communities, please visit our Nearby Page for Hobson City. For an expanded list of the communities that are closest to Hobson City, see our County-by-County Page for Hobson City.
A Census QuickFact is available for Calhoun County (QF-01015).
Below are QuickFacts for the counties that border Calhoun County.
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Hobson City, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Hobson City. It's important to note that from one Census to the next, the shape and location of the polygon can change.
If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
The sampling area (or polygon) given for the 2010 Census is 4.63% smaller than the 2000 Census.
The 2010 Census shows that the total area for Hobson City was 1.04 square miles [2.7 km²]. Of this total, only a minor amount of the area is covered by water.
The 2000 Census shows a total area of 1.09 square miles [2.8 km²]. Of this total, only a minor amount of the area is covered by water.
While generally coinciding with the GPS location (latitude/longitude) of Hobson City, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Hobson City.
For the 2010 Census, the location was given as:
Lat: 33.618801° (or 33°37'7" N)
Lon: -85.846146° (or -85°50'46" W)
For the 2000 Census, the location given was:
Lat: 33.618497° (or 33°37'6" N)
Lon: -85.843425° (or -85°50'36" W)
The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 833 feet to the west<5> of the location that was used in the 2000 Census.
The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2405845) to Hobson City. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Hobson City. The GNIS point has been mapped to the latitude/longitude:
Lat: 33.614067° (or 33°36'50" N)
Lon: -85.857935° (or -85°51'28" W)
The GSP location given for the 2010 Census lies 3,973 feet to the northeast<6> of the point given by the GNIS for Hobson City. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Hobson City.
Miscellaneous Information for Hobson City ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has referenced one (or more) of the following identifiers when referring to either Calhoun County or the town of Hobson City:
The GNIS Codes ...
The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Hobson City:
GNIS ID for Hobson City: 2405845
GNIS ID for Calhoun County: 161533
GNIS ID for Alabama: 1779775
The FIPS Codes ...
An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
State Code: 01 (Alabama)
County Code: 015 (Calhoun County)
Place Code: 35152 (Hobson City)
State & County Code: 01/015 (Alabama / Calhoun County)
State & Place Code: 01/35152 (Alabama / Hobson City)
Misc. Census Codes ...
Hobson City is located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Hobson City.
|<1>||Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2015.|
- Return to Citation
|<2>||Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.|
- Return to Citation
|<3>||A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).|
- Return to Citation
|<4>||The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.|
- Return to Citation
|<5>||The calculated bearing (or the angle) to the 2010 Census location is 82 degrees.|
- Return to Citation
|<6>||The calculated bearing (or the angle) to the GNIS point is 295 degrees.|
- Return to Citation
For additional information, please visit our Glossary for Hobson City.