Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Lambeth - Boutwell Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Lambeth - Boutwell Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Lambeth - Boutwell Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Flomaton
(4 miles [6.4 km] to the southeast)
- Hammac
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Hammac have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hammac
- Hammac is located in Escambia County
- Century
(6 miles [9.7 km] to the south)
- Byrneville
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Byrneville
- Byrneville is located in Escambia County (FL)
- Pollard
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Pollard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pollard
- Pollard is located in Escambia County
- Population from the 2020 Census: 132 people
- Jay
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Jay
- Jay is located in Santa Rosa County (FL)
- Population from the 2020 Census: 653 people
- Jump to TripAdvisor's Tourism page for Jay <2>
- Atmore
(12 miles [19.3 km] to the west)
- Brewton
(13 miles [20.9 km] to the east)
- McDavid
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for McDavid have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDavid
- McDavid is located in Escambia County (FL)
- Riverview
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Riverview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverview
- Riverview is located in Escambia County
- Population from the 2020 Census: 181 people
- East Brewton
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for East Brewton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Brewton
- East Brewton is located in Escambia County
- Population from the 2020 Census: 2,326 people
- Jump to TripAdvisor's Tourism page for East Brewton <2>
- Huxford
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Huxford
- Huxford is located in Escambia County
- Walnut Hill
(17 miles [27.4 km] to the southwest)
- Range
(17 miles [27.4 km] to the north)
- Jump to our Gazetteer entry for Range
- Range is located in Conecuh County
- Perdido
(19 miles [30.6 km] to the west)
- Goodway
(19 miles [30.6 km] to the northwest)
- Jump to our Gazetteer entry for Goodway
- Goodway is located in Monroe County
- Lenox
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Lenox have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lenox
- Lenox is located in Conecuh County
- Jump to TripAdvisor's Tourism page for Lenox <2>
- Pine Barren
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Pine Barren have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Barren
- Pine Barren is located in Escambia County (FL)
- Uriah
(20 miles [32.2 km] to the northwest)
- Megargel
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Megargel
- Megargel is located in Monroe County
- Castleberry
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Castleberry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castleberry
- Castleberry is located in Conecuh County
- Population from the 2020 Census: 527 people
- Phillipsville
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Phillipsville
- Phillipsville is located in Baldwin County
- Molino
(23 miles [37 km] to the south)
- Repton
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Repton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Repton
- Repton is located in Conecuh County
- Population from the 2020 Census: 254 people
- Jump to TripAdvisor's Tourism page for Repton <2>
- Excel
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Excel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Excel
- Excel is located in Monroe County
- Population from the 2020 Census: 619 people
Off-the-Road Links ...
The official website for Escambia County: www.co.escambia.al.us/
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Lambeth - Boutwell Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.0705, Longitude: -87.2969 In this case, the coordinates for the Lambeth - Boutwell Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |