Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Jacksonville Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Jacksonville Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Jacksonville Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Clayton
(4 miles [6.4 km] to the south)- Jump to our Gazetteer entry for Clayton
- Clayton is located in Barbour County
- Population from the 2020 Census: 2,829 people
- Jump to TripAdvisor's Tourism page for Clayton <2>
- Comer
(7 miles [11.3 km] to the north)- Jump to our Gazetteer entry for Comer
- Comer is located in Barbour County
- Midway
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Midway
- Midway is located in Bullock County
- Population from the 2020 Census: 457 people
- Spring Hill
(11 miles [17.7 km] to the northeast)- Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Hill
- Spring Hill is located in Barbour County
- Pine Grove
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Pine Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Grove
- Pine Grove is located in Bullock County
- Bakerhill
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Bakerhill
- Bakerhill is located in Barbour County
- Population from the 2020 Census: 229 people
- Louisville
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for Louisville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Louisville
- Louisville is located in Barbour County
- Population from the 2020 Census: 457 people
- Hawkinsville
(13 miles [20.9 km] to the northeast)- Note: The GPS coordinates that we are using for Hawkinsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hawkinsville
- Hawkinsville is located in Barbour County
- Smuteye
(13 miles [20.9 km] to the west)- Jump to our Gazetteer entry for Smuteye
- Smuteye is located in Bullock County
- Three Notch
(14 miles [22.5 km] to the northwest)- Note: The GPS coordinates that we are using for Three Notch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Notch
- Three Notch is located in Bullock County
- Eufaula
(16 miles [25.7 km] to the east)- Jump to our Gazetteer entry for Eufaula
- Eufaula is located in Barbour County
- Population from the 2020 Census: 11,621 people
- Jump to TripAdvisor's Tourism page for Eufaula <2>
- Perote
(16 miles [25.7 km] to the west) - Big Eddy ‑ Historic
(17 miles [27.4 km] to the east) - Clio
(18 miles [29 km] to the southwest)- Jump to our Gazetteer entry for Clio
- Clio is located in Barbour County
- Population from the 2020 Census: 1,268 people
- Jump to TripAdvisor's Tourism page for Clio <2>
- Georgetown
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Quitman County (GA)
- Blue Springs
(19 miles [30.6 km] to the south)- Jump to our Gazetteer entry for Blue Springs
- Blue Springs is located in Barbour County
- Population from the 2020 Census: 86 people
- Glenville
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Glenville
- Glenville is located in Russell County
- Inverness
(19 miles [30.6 km] to the west) - Screamer
(20 miles [32.2 km] to the southeast)- Jump to our Gazetteer entry for Screamer
- Screamer is located in Henry County
- Buckhorn
(21 miles [33.8 km] to the southwest) - Hurtsboro
(21 miles [33.8 km] to the north)- Jump to our Gazetteer entry for Hurtsboro
- Hurtsboro is located in Russell County
- Population from the 2020 Census: 597 people
- Elamville
(22 miles [35.4 km] to the southwest)- Jump to our Gazetteer entry for Elamville
- Elamville is located in Barbour County
- Clopton
(22 miles [35.4 km] to the south) - Union Springs
(22 miles [35.4 km] to the northwest)- Jump to our Gazetteer entry for Union Springs
- Union Springs is located in Bullock County
- Population from the 2020 Census: 3,352 people
- Jump to TripAdvisor's Tourism page for Union Springs <2>
- Pittsview
(23 miles [37 km] to the northeast)- Note: The GPS coordinates that we are using for Pittsview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pittsview
- Pittsview is located in Russell County
- Jump to TripAdvisor's Tourism page for Pittsview <2>
- Postoak
(23 miles [37 km] to the west)- Jump to our Gazetteer entry for Postoak
- Postoak is located in Bullock County
- Saco
(23 miles [37 km] to the west)
Off-the-Road Links ...
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Jacksonville Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.9335, Longitude: -85.4252 In this case, the coordinates for the Jacksonville Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |