|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Danzey Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Danzey Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Danzey Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Graball
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Graball
- Graball is located in Henry County
- Former names for Graball:
- Hart's Crossroads
- Hudspeth's Crossroads
- Abbeville
(3 miles [4.8 km] to the southeast)
- Capps
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Capps
- Capps is located in Henry County
- Oakey Grove
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Oakey Grove
- Oakey Grove is located in Henry County
- Bertha
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Bertha
- Bertha is located in Dale County
- Clopton
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Clopton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clopton
- Clopton is located in Dale County
- Shorterville
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Shorterville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shorterville
- Shorterville is located in Henry County
- Screamer
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Screamer
- Screamer is located in Henry County
- Newville
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Newville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newville
- Newville is located in Henry County
- Population from the 2020 Census: 510 people
- Bakerhill
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Bakerhill
- Bakerhill is located in Barbour County
- Population from the 2020 Census: 229 people
- Oketeyeconne ‑ Historic
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Oketeyeconne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oketeyeconne
- Oketeyeconne is located in Clay County (GA)
- Blue Springs
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Blue Springs
- Blue Springs is located in Barbour County
- Population from the 2020 Census: 86 people
- Fort Gaines
(14 miles [22.5 km] to the east)
- Skipperville
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Skipperville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skipperville
- Skipperville is located in Dale County
- Haleburg
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Haleburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haleburg
- Haleburg is located in Henry County
- Population from the 2020 Census: 98 people
- Headland
(17 miles [27.4 km] to the south)
- Mabson
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Mabson
- Mabson is located in Dale County
- Phillips Crossroads
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Phillips Crossroads
- Phillips Crossroads is located in Dale County
- Arguta
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Arguta
- Arguta is located in Dale County
- Ewell
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Ewell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ewell
- Ewell is located in Dale County
- Louisville
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Louisville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Louisville
- Louisville is located in Barbour County
- Population from the 2020 Census: 457 people
- Clio
(20 miles [32.2 km] to the west)
- Napier Field
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Napier Field have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Napier Field
- Napier Field is located in Dale County
- Population from the 2020 Census: 344 people
- Kinsey
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Kinsey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kinsey
- Kinsey is located in Houston County
- Population from the 2020 Census: 2,293 people
- Clayton
(21 miles [33.8 km] to the northwest)
Off-the-Road Links ...
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Danzey Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.5974, Longitude: -85.2908 In this case, the coordinates for the Danzey Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|